Sanizone (OPTIONAL)

Located in the equipment compartment, the Sanizone ozonator converts O2 into O3. In such form, it acts as an oxidizer, and reduces the need for sanitation (bromine or chlorine).

Biozone

The spas are equipped with our exclusive BiOzone purification system. BiOzone is the combination of ozone (a strong oxidizer) and Simple Pure, our trademarked mineral sanitation system.

Simple Pure Sanitizer (OPTIONAL)

The cartridge is housed in your filter attached to
the filter cap. It works in conjunction with the Sanizone ozonation system. Simple Pure sanitation procedures are different than conventional means, therefore you must carefully follow the Simple Pure Sanitizer instructions.

Purifier Start Up
Upon filling your spa, balance the water per dealer guidelines. Add 1 teaspoon of dichlor to the spa per 250 gallons.

Every Day
No action required.

Before Each Use
Add 1 tablespoon of potassium peroxymonosulfate (MPS) to spa per 250 gallons

Once A Week (if required)
Per “Brand” guidelines, shock with a chlorine or bromine shock.

Every 4 Months
Drain and refill spa.
Replace Simple Pure cartridge.

As Needed
If water looks hazy, shock treat with 1 teaspoon of dichlor per 250 gallons.

Note: Potassium peroxymonosulfate may cause a lowering of the pH and total alkalinity of your spa water. Please monitor pH and total alkalinity at least once per week and adjust accordingly.